Category Archives: Housekeeping

Why Invest In Outdoor Furniture Cover?

Published by:

Having someplace to call your own, a house worthy of being called home, that is what many people aspire for especially when they start working and start longing for our own place. And when you do get your own house finally, you start being extra careful and meticulous over your furniture and fixtures.

Garden Furniture

For those fortunate to have their own backyard or front lawns, there is no better feeling than laying out on your lawn chairs, or enjoying a meal on your garden table. But let’s face the fact that taking care of these items are a burden especially since they are generally exposed all the time.

Some of the things we have to worry about include:

Pets – dogs, cats, and other pets tend to play around your patio and lawn furniture and would leave scratch marks, run over them, or worse turn it into their own litter box.

Rain – Wooden furniture looks good on your porch or patio but they are more prone to being wet from the rain, which is bad.

Heat – Especially for plastic fixtures and furniture, extreme heat can cause them to warp and bend and compromise their general composition and durability.

Insects / Pests – While very unlikely, some insects do increase the possibility of rot on your lawn furniture.

That is why it is important to invest in the proper protection such as patio furniture covers, sheets, and the like.

What are several advantages of using dedicated patio furniture covers? Why not just use huge sheets of plastic or old blankets and canvass sheets?

Patio Furniture Covers are durable – these covers were made specifically to help cover and protect your patio furniture and are therefore made to specifications suited to handle the task. Better stitching, material, and quality. You can find more of these at patiofurniturecovers.com

They fit! – In order to keep them in place, covers are made to fit specific sized furniture. There are covers for seats, for benches, for tables, for squares, tube-shaped chairs, and any other shape or size. Plus they normally come with zippers or garters to help ensure a snug fit.

You spend your hard-earned cash to make your house nice and pretty, so its not a stretch to spend a little more to make sure everything stays pretty much the way they are for a long time. It’s an investment you have to commit to, kind of like buying insurance, only its for your outdoors furniture.

Maintaining Clean Floors to Impress Your Guest

Published by:

Having hardwood flooring inside your house is a smart way to save money for the future. This can make your house look classy; it lasts longer and gives the house a higher value if you decide to sell it later on. Although, this entails some work and a bit of time, wooden floors should be maintained correctly if you want them beautiful for the coming years. It is easy to keep hardwood floors clean, with some study and the right sets of tools to use; you will definitely make them look like new one for long periods.

Keep in mind that maintaining your hardwood floors clean is a constant job.  It requires a few minutes every day and you will save lots of time and money if you need to do the floor finishing again. If you maintain them properly especially in the beginning then you will be seeking the service of a floor specialist.

Firstly, having a firm idea what finishing your floor will have is always good. You may choose wax or a urethane product such as polyurethane, which actually do not blend. If you choose the wax-type for your finishing then you cannot use urethane on top for maintenance. Conversely, if your floor is urethane finishing then you cannot use wax on top since it will not stick. If you are hesitant, contact floor specialists and seek advice on how to take care of your boards properly.

Clean Floors

In any case, you should sweep your bamboo hardwood flooring with a soft bristle broom on a daily basis. If there are lots of tiny particles, dirt, dust on your floors then these will most likely create friction all over the floors and cause abrasion, which could scratch off your floor finishing. Try to use the soft bristle attachment on the vacuum to clean your floors and then finish with a mop for the leftover dust.

Making use of a damp mop on floors is good provided it is really a moisture-free mop. It is not advisable to have water on your floors. Remove water spills on all wooden areas right away. Liquids will not only create stains on your floors it will also flow unto some cracks or crevices that might create problems in the future. The grain of wooden finishing may also rise up if water is present particularly those older ones that used old sealant or a finish that is not in good condition.

If your mop is not working, make use of a mild, acid-neutral cleanser like oil soap or dishwashing liquid. Avoid saturating the floor and be certain to rinse after cleaning. Try not to apply strong vinegars or ammonia on your floor. After cleaning, dry your floor properly. Having a waxed-finish on your floor requires re-applying wax occasionally followed by buffing.  Avoid using furniture polishes on your floor, these will not give your floor the needed maintenance and may damage the finishing even more. A floor with a urethane finish requires recoating once every five to seven years.

Maintaining your hardwood flooring properly can prolong its life and provide you satisfaction for years, even decades to come.

The Top Five Termite Control Tips Every Homeowner Should Know

Published by:

Termite-free Home

Termites are a problem for many homeowners. Getting rid of them can also very difficult. The good news is that there are a number of things that you can do to prevent them from occurring in the first place. Below are five tips that will help you prevent termites:

Fix Leaks Around Your Home
Termites need water to survive. If there is water coming from your home, then that will make it lot easier for a termite colony to thrive. That is why you want to make sure that you get all of the leaks in your home fixed. If you can eliminate the termites’ water source, then you will be removing one of
the three things that they need to survive.

Do Not Put Mulch Near Your Home
Mulch not only provides termites with water, but it also provides them with food. Food is another thing that termites need to survive. If you have mulch near the outside of your home, then you can very easily attract termites. You may want to consider trying rubber mulch instead of wood mulch. Rubber mulch looks a lot like wood mulch, but it is much less likely to attract termites.

Seal Cracks
Termites can very easily enter through the cracks in your home. That is why if you have any holes or cracks inside of the foundation of your house, then you want to get them sealed as soon as possible. This will make it a lot harder for those wandering pests to come inside of your home.

Store Firewood Away From Your Home
Wood is the thing that termites consume the most. Therefore, if you have firewood near your home, then you are inviting termites. You should store firewood in a place that is not close to your home. If you do not have a storage place for the firewood, then you should put thick concrete slabs underneath the wood. This will make it harder for the termites to get to the wood. Furthermore, consider building your fencing out of steel rather than wood. This will act as a deterrent and potentially last a lot longer. A quick Google search for steel posts in Brisbane or other termite prone locations is a good place to start.

Get A Yearly Inspection
Even if you think that your home is termite-free, it would not hurt to get a yearly inspection. If termites are detected early, then it will be much easier for a pest control specialist to prevent them from infesting your home.

Termites are unwanted guests who choose to enter many people’s home. You can keep them from infesting your home by fixing leaks and sealing cracks. You also need to make sure that you do not keep firewood or mulch around your home. Furthermore, it is wise to get a yearly inspection.

How To Choose An Air Compressor

Published by:

Air CompressorAnyone who is going to use air tools is going to need a compressor. It doesn’t matter if they are using an impact wrench for mechanic’s work, an air nailer for construction, or any other pneumatic tool, without a compressor to power the tool; it’s going to do no more work than be a paperweight. The right air compressor is just as important as the tools that it is going to power.

So, how do you select the right air compressor? For a lot of people, it’s just a matter of looking over the compressors available, and picking out one they like. However, this is kind of a haphazard way of buying an expensive piece of equipment. It’s better to have some idea of what one is looking for, before starting to look.

Gas vs. Electric

Most air compressors on the market are electric powered. They have to be plugged into a normal 120 VAC outlet for power. But, what do you do when there’s no electric power to run the compressor? In those cases many people have to use a generator to power their compressor. That’s just one more piece of equipment to carry around.

If one is working on a lot of job sites where electricity isn’t available, it’s a good idea to buy a gas powered compressor. That reduces the amount of equipment that needs to be dragged to the job site, and the gas powered compressor will be more fuel efficient than powering an electric compressor off of a generator.

When selecting an electric compressor, it is important to keep in mind the maximum current draw of the compressor. When the motor starts, it draws a surge of power. That’s the worst power consumption. If there’s ever a time when the compressor is going to trip a circuit breaker, that’s the time. Remember, most outlets are only on 20 amp breakers. Manufacturers keep this in mind with their designs, but a big compressor running off the same circuit as other equipment can still trip a breaker.

What do the Specs Mean?

While I suppose it’s possible to buy a compressor just based upon how it looks, that’s really not much of a criteria. You’ve got to understand what the specs are and what they mean. Here are the basic specs that you’ll be looking at:

Motor size – measured in horsepower (HP). Everyone likes to brag about the horsepower, but it really doesn’t mean much of anything. The only time it comes into consideration is when comparing two compressors which are otherwise equal. The higher horsepower compressor doesn’t have to work as hard, so it will probably last longer.

Tank capacity – measured in gallons. This is somewhat important. The larger the tank, the longer your air tools can run off of the “bottled” air, before the compressor needs to turn on again. You don’t want the compressor running at any more than a 60% duty cycle, or there’s a good chance the motor will burn out. More than anything, tank capacity is a convenience. If you are running tools that consume a lot of air for several minutes at a time, with rest periods for the compressor to recover between times, a larger tank helps. Likewise if you have several people working off the same compressor.

Weight – measured in pounds. If the compressor is a portable unit, this is important. Some of these babies can be heavy enough to really mess up your back if you try and pick them up. For mobile operations, like construction work, a lighter weight compressor is helpful.

Max pressure – measured in pounds per square inch (PSI). This is not very important, as pretty much every compressor on the market provides more pressure than air tools need. As long as the compressor will produce 120 PSI, you can run almost anything on it. There are a few high-power tools which require more than 120 PSI; in those cases, you need to pay attention to this specification.

Air capacity – measured in cubic feet per minute (CFM). This is the single most important specification on any air compressor, and for some reason most manufacturers hide it in the small print. This is how much air the compressor is able to compress at a particular pressure. Typically, manufacturers will rate their compressors at two different pressures, 40 PSI and 90 PSI. As there aren’t any air tools which use only 40 PSI of air, that really doesn’t mean much, it’s the 90 PSI figure that counts. This is critical information, as the air capacity of the compressor must be higher than the air consumption of the tools that will be attached to it.

Air Compressor Styles

There are several common styles of air compressors. While they all pretty much do the same thing, the form factor is different, intended to be used in different ways.

Pancake – These compressors are small units, typically with a six gallon round tank. They are compact units, which makes them very popular with contractors, for powering air nailers. The Porter Cable C2002WK is a popular model of this style compressor.

Hotdog Portable – These are very small compressors, designed for high portability. Typically the tank is only one or two gallons. Like the pancake, they don’t have wheels, but are light enough to carry. The Senco PC1010 is a good example of this type of compressor.

Twin Tank – These are another compact compressor style, designed to be carried. The major difference between one of these and the hotdog is that it has more tank capacity; about twice what the hotdog has. Gauges and controls are mounted on a control panel, for those that like that. They usually have two air chucks, as opposed to the single chuck that most compressors have. The Makita MAC2400 is a good example of this style.

Wheelbarrow – Wheelbarrow compressors are twin tank units with a single wheel. Handles at the other end allow the compressor to be moved much like a wheelbarrow. These are higher capacity units, with much larger tanks, somewhere between 5 and 8 gallons total capacity.

Horizontal – This is the “standard” compressor design, with wheels at one end and a handle at the other to move it around. Horizontal compressors vary incredibly in their capacity, with tanks all the way up to 20 gallons. The larger ones can power two to three air tools at a time. The Campbell Hausfeld HL540100AV is a great example of a horizontal compressor.

Vertical – Vertical compressors are not designed to be portable, but are rather shop compressors. By turning the tank vertically, the compressor takes up less floor space in the shop. These are high capacity compressors, with tanks up to 40 gallons in size. They are intended for use with multiple air tools at a time. DeWalt’s D55168 is a small vertical compressor.

Air Consumption

As I’ve already mentioned, the most important specification on an air compressor is the amount of compressed air that is produces. If a compressor can’t produce enough air to power the tools being connected to it, it is essentially worthless. This table should help in determining how much air capacity you need in your compressor. Keep in mind that these are approximations; you need to check the actual specifications of the tools you are going to use, as specifications can vary.

Author Bio: Ryan Hill is a review expert especially when it comes to explaining the difference between certain power tools.  Find more information about power tool reviews by visiting his website.

How to Clean Your Carpet

Published by:

Carpet cleaning at homeKeeping your carpet clean and presentable can be difficult if you do not know how to efficiently do it. On the other hand, you need not be a genius to learn how to clean it like a professional. You can simply follow the steps below:
  • Mix Some Laundry Detergent: Get a small container where you can mix clean water with some laundry detergent. Be careful in putting either of the two together and ensure that you have the right amount of each. Use a clean cloth to mix the water and detergent.
  • Use A New Vacuum Cleaner Bag: Whenever you are utilizing your vacuum cleaner, you should keep in mind to always use a new vacuum cleaner bag once you are about to vacuum a new part of the carpet or if you want to go through it again. Vacuum the carpet coming from different directions to ensure that every dust particle is covered.
  • Wipe The Carpet With The Cloth: Do not just depend on the vacuum cleaner to do the job for you. You did not mix the water and the laundry detergent just for the fun of it. When you are done with the vacuum, make sure to wipe a small portion of the carpet using the damp cloth. This will also collect any remaining lint from the top.
  • Use Your Carpet Brush: It is important that you have a carpet brush whenever you plan to clean your carpet. Keep in mind that the best way to do this is by treating the rough spots and stains by letting the solution be soaked for a couple of minutes before you scrub it using the carpet brush. This may be a bit difficult especially if you are trying to remove a stain that has been stuck for a week or so. Make sure that if your carpet has a stain, clean it as soon as possible.
Cleaning the carpet may take time but then again, keeping your home clean should be one of your priorities. If you want things to be more convenient for you, you can utilize some carpet cleaner mill hill next time.

The Benefits of House Cleaning Services

Published by:

House Cleaning in Finland

Employing the services of house cleaning companies may not be all that bad especially if you are pressed for time to clean it yourself. With the current economy looking the way it is right now, life just gets more demanding and there just is not much time to do things anymore. On the other hand, employing the service of people willing to clean your house for money has its benefits. You should realize that how your siivous sopimussiivous Vantaa looks reflects on your character. You do not want your neighbors or guests visiting your house to get the impression that you are slacking off when it comes to cleaning right? At the worst, a disorganized and dirty house often tells that the owner is mentally disorganized as well and that is not good.

But by hiring these people, not only do you get to keep your house clean but you can also focus on accomplishing other important tasks. Another is that it promotes good health inside your house. This will keep your family safe from infections caused by accumulated dust and dirt. Furthermore, keeping your house regularly clean can definitely protect your investments. Remember, a dirty house can definitely degrade its value. When hiring house cleaning services, expect that the price for their service may vary depending on the how often you clean your house.

There is a big difference in effort if you are going to clean a house that has not been cleaned for ages compared to a house that is kept clean on at least a weekly basis. It also depends on how big the house is. Do not expect to pay the standard seventy five dollars if your house has at least one hundred rooms for example versus your neighbor’s which only has one floor. Location may also very. House cleaning in finland for example may charge a different fee for their services compared to your local house cleaning company. Overall, employing the services of house cleaning companies is advantageous and worth your money. If you are already foreseeing that you would not make it cleaning your house this coming weekend in preparation for some visiting guests then considering house cleaning companies may be a good idea.